Cabling The 5887 Disk Drive Enclosure To An Edr1 Pcie Storage Enclosure That Is Attached To An 8248-L4T, 8408-E8D, Or 9109-Rmd - IBM Power System 5888 Service Information

Figure 28. One EDR1 PCIe storage enclosure connected to a single 8248-L4T, 8408-E8D, or 9109-RMD system by
using two FC 1914 PCIe2 GX++ adapters and two PCIe cables
Figure 29 shows two EDR1 PCIe storage enclosures connected to a single 8248-L4T, 8408-E8D, or
9109-RMD system by using two FC 1914 PCIe2 GX++ adapters and four PCIe cables.
Figure 29. Two EDR1 PCIe storage enclosures connected to a single 8248-L4T, 8408-E8D, or 9109-RMD system by
using two FC 1914 PCIe2 GX++ adapters and four PCIe cables
Cabling the 5887 disk drive enclosure to an EDR1 PCIe storage enclosure that is
attached to an 8248-L4T, 8408-E8D, or 9109-RMD
Use this information as a guide for cabling your disk drive enclosure to your PCIe storage enclosure.
Figure 30 on page 26 shows one 8248-L4T, 8408-E8D, or 9109-RMD with two 5887 disk drive enclosures
connected to one EDR1 PCIe storage enclosure by using four SAS EX cables.
Note: The IBM i operating system does not support attaching more than one 5887 disk drive enclosure to
an EDR1 PCIe storage enclosure.
25
Service information