Radio Mode; Adjusting The Tuner; Switching To Radio Mode - Blaupunkt BRISBANE SD48 7 648 000 310 Operating And Installation Instructions

Car radio sd usb mp3 wma
Table of Contents

Advertisement

Adjusting the volume
When you have fi nished making your chang-
es,
press the MENU button >.
u
To exit the menu,
press the ESC button <.
u
Notes:
If the volume listened to is higher than
the set "TEL VOL" value, telephone
calls or navigation announcements
are played back at the volume lis-
tened to.
Using the volume control 6, you can
adjust the volume for telephone calls
and navigation announcements di-
rectly during the playback.

Radio mode

Adjusting the tuner

To ensure proper functioning of the tuner,
the device must be set for the region in
which it is being operated. You can select
between Europe (EUROPE), America (USA)
and Thailand (THAI). The tuner is factory-
set to the region in which it was sold. If you
experience problems with your radio recep-
tion, please check this setting.
The radio functions described in these op-
erating instructions refer to the tuner set-
ting EUROPE.
u
Switch off the device by pressing but-
ton 4.
u
Hold the buttons 1 8 and DIS ;
pressed at the same time and switch on
the device again with the button 4.
The current setting is displayed.
u
Select your tuner region with the
button 2.
To save the setting and to exit the menu,
press the MENU button >.
u

Switching to radio mode

If you are in SD, USB, CD changer or AUX-
IN mode,
u
press the BND•TS button 5
or
u
press the SRC button 3 repeatedly
until "TUNER" appears on the display.
Radio mode
or
51

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brisbane sd48Victoria sd487 648 000 3107 648 001 310

Table of Contents