Cd-Changer Mode; Switching To Cd-Changer Mode; Selecting Cds; Selecting Tracks - Blaupunkt BRISBANE SD48 7 648 000 310 Operating And Installation Instructions

CD-changer mode

CD-changer mode
Notes:
• Information about handling CDs, in-
serting CDs and operating the CD
changer can be found in the operat-
ing instructions supplied with your
CD changer.
• Before connecting a CD changer,
check whether the "CDC ON" setting
has been select in the menu. For fur-
ther details, please read the section
"Adjusting the rear AUX-IN input" in
the chapter "External audio sources".

Switching to CD-changer mode

u Press the SRC button 3 repeatedly
until the display shows "CDC/AUX-IN".
If a CD changer is connected, the display
shows "CHANGER". The device starts play-
ing the fi rst CD that the CD changer de-
tects.

Selecting CDs

To move up or down to another CD,
u
press the or
several times.
Note:
The device will ignore empty CD slots in
the changer and slots containing invalid
CDs.
62
2 button once or

Selecting tracks

To move up or down to another track on the
current CD,
u
press the or
several times.

Fast searching (audible)

To fast search backwards or forwards,
u
press and hold down the
2 for longer than two seconds.
Seek tuning continues as long as you hold
the button pressed.
Confi guring the display
Three options are available for the display in
CD changer mode:
• Track number and playing time
• Track number and time
• CD number and track number
To switch between the different display op-
tions,
u press the DIS button ;.
Repeating individual tracks or
whole CDs (REPEAT)
You can repeatedly play the current track or
all tracks on the current CD.
Press the button 4 RPT 8 repeatedly
u
until the desired function appears on
the display:
• "RPT TRACK" (current track)
• "RPT DISC"
(all tracks on the current CD)
• "RPT OFF" (end repeat)
2 button once or
or button