Factory Settings (Normset) - Blaupunkt BRISBANE SD48 7 648 000 310 Operating And Installation Instructions

Factory settings
(Normset)
You can reset the device to the factory set-
tings.
Notes:
• Your personal settings are deleted
during reset (Normset).
• The setting "CDC ON" or "CDC OFF" is
not changed by the reset.
u Press the MENU button >.
The display shows "MENU".
u
Press the or
edly until "NORMSET" appears on the
display.
To reset the device to the factory settings,
u press the MENU button > for longer
than 4 seconds.
"NORM ON" appears on the display and the
device is reset.
Note:
If you press the MENU button > for
less than 4 seconds, the device is not
reset and the display shows "NORM
OFF". Your settings are retained.
button 2 repeat-
Factory settings:
Volume of traffi c an-
nouncements (TA VOL)
Power-on volume
(ON VOL)
Volume of muting
(MUTE LEVEL)
Volume of telephone/nav-
igation announcement
(TEL VOL)
Seek tuning sensitivity
(SENS)
Scan time (SCAN TIME)
Programme type (PTY)
PTY language
(PTY LANG)
Time display (CLOCK)
Time (CLOCK SET)
Time display mode
(CLOCK MODE)
Confi rmation beep
(BEEP)
Regional function (REG)
Display brightness
RDS
Factory settings
30
20
0
25
HI6
10
OFF
ENGLISH
OFF
0:00
24H
ON
OFF
DAY 15,
NIGHT 12
ON
75