Blaupunkt BRISBANE SD48 7 648 000 310 Operating And Installation Instructions page 30

Adjusting E-TREBLE
To adjust the frequency of the treble,
u press the MENU button >.
The display shows "MENU".
u
Press the or
until "AUDIO" appears on the display.
u button 2 to call up the
Press the
audio menu.
"BASS" appears on the display.
u
Press the or
until "ENHANCED" appears on the dis-
play.
u button 2 to call up the
Press the
submenu.
"E-BASS" appears on the display.
u
Press the or
edly until "E-TREBLE" appears on the
display.
u button 2 to call up the
Press the
submenu.
"FREQ" (frequency) and the currently set
value are displayed.
u
Press the or
the selected setting.
When you have fi nished making your chang-
es,
u press the MENU button >.
To exit the menu,
u press the ESC button <.
button 2 repeatedly
button 2 repeatedly
button 2 repeat-
button 2 to change
Adjusting E-MIDDLE
To set the gain, the frequency and the qual-
ity factor of the middle,
press the MENU button >.
u
The display shows "MENU".
u
Press the or
until "AUDIO" appears on the display.
u button 2 to call up the
Press the
audio menu.
"BASS" appears on the display.
u
Press the or
until "ENHANCED" appears on the dis-
play.
u button 2 to call up the
Press the
submenu.
"E-BASS" appears on the display.
u
Press the or
edly until "E-MIDDLE" appears on the
display.
u button 2 to call up the
Press the
submenu.
"GAIN" and the currently set value are dis-
played.
u
Press the or
between "GAIN", "FREQ" (frequency)
and "QFAC" (quality factor).
u
Press the or
the selected setting.
When you have fi nished making your chang-
es,
u press the MENU button >.
To exit the menu,
press the ESC button <.
u
Sound
button 2 repeatedly
button 2 repeatedly
button 2 repeat-
button 2 to select
button 2 to change
67