Sound; Equalizer - Blaupunkt BRISBANE SD48 7 648 000 310 Operating And Installation Instructions

Sound

For every source (radio, SD, USB, CD
changer or AUX-IN), you can perform indi-
vidual and separate settings for the sound
(bass, middle and treble) and the equal-
izer.
The X-Bass and volume distribution settings
(balance and fader) apply to all the audio
sources.

Equalizer

This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and mid-
dle and to adjust the level for the selected
frequency. In addition, you can adjust the
quality factor for bass and middle.
Equalizer settings
The table below shows the bass, treble and
equaliser setting options in the "AUDIO"
menu.
BASS
Level
-7 to +7
(GAIN)
Frequency
(FREQ)
Quality fac-
tor (QFAC)
TREBLE
-7 to +7
– –
– –
Basic settings
Some settings
"ENHANCED"), e.g. "E-BASS". These settings
are performed in the "ENHANCED" submenu.
Note:
The table does not contain all the set-
tings that are possible in the menus
"AUDIO" and "ENHANCED".
Adjusting BASS
To adjust the level of the bass,
u press the MENU button >.
The display shows "MENU".
u
Press the or
until "AUDIO" appears on the display.
u button 2 to call up the
Press the
audio menu.
"BASS" appears on the display.
u button 2 to call up the
Press the
submenu.
"BASS" and the currently set value for the
level are displayed.
Audio
ENHANCED
E-BASS E-MIDDLE
– -7 to +7
0.5 kHz,
60 Hz, 80 Hz,
1.0 kHz,
100 Hz or
1.5 kHz or
200 Hz
2.5 kHz
1.0, 1.25, 1.5
or 2.0
Advanced settings
Sound
feature an "E"
button 2 repeatedly
E-TREBLE
-
10 kHz,
12.5 kHz,
15 kHz or
17.5 kHz
0.5, 0.75, 1.0
–
or 1.25
(for
65