Adjusting E-Xbass - Blaupunkt BRISBANE SD48 7 648 000 310 Operating And Installation Instructions

X-Bass
u
Press the or
until "X-BASS" appears on the display.
u button 2 to call up the
Press the
submenu.
"X-BASS" and the currently set value are
displayed.
u
Press the or
until the desired setting appears on the
display.
When you have fi nished making your chang-
es,
u press the MENU button >.
To exit the menu,
press the ESC button <.
u

Adjusting E-XBASS

In the "E-XBASS" submenu, you can also ad-
just the cut-off frequency in addition to the
X-BASS boost. You can select whether the
increase should affect the entire X-BASS
frequency range (setting "FLAT") or pur-
posefully only one of three X-BASS frequen-
cies (400 Hz, 800 Hz, 2400 Hz).
Press the MENU button >.
u
The display shows "MENU".
u
Press the or
until "AUDIO" appears on the display.
u button 2 to call up the
Press the
audio menu.
"BASS" appears on the display.
u
Press the or
until "ENHANCED" appears on the dis-
play.
70
button 2 repeatedly
button 2 repeatedly
button 2 repeatedly
button 2 repeatedly
u button 2 to call up the
Press the
submenu.
"E-BASS" appears on the display.
u
Press the or
edly until "E-XBASS" appears on the
display.
u button 2 to call up the
Press the
submenu.
"GAIN" and the currently set value are dis-
played.
u
Press the or
between "GAIN" (X-BASS boost) and
"FREQ" (frequency).
u
Press the or
the selected setting.
When you have fi nished making your chang-
es,
u press the MENU button >.
To exit the menu,
press the ESC button <.
u
button 2 repeat-
button 2 to select
button 2 to change