Table of Contents
Advertisement
8.
PROGRAMS
Program
Mini
Universal
Standard
Intensive
Inorganic
materials
Organic
materials
Plastics
Pipettes
Oil
Disin 93/10
Cold water
rinse
REV.0.01_COD.650184_A4
Button Application
Short program for lightly soiled items and loads that do not
require intensive cleaning.
For removing organic residues and certain inorganic residues.
For standard applications and analyses, light to medium levels of
soiling, and medium rinse requirements.
Simple program for a range of stains.
For light soiling and low rinse requirements:
Not suitable for denaturing and acid-soluble residues such as
proteins, metallic salts, and amines.
For removing organic residues and certain inorganic residues.
For standard applications and analyses, medium to heavy
soiling, and medium to high rinse requirements.
For removal of inorganic residues.
General program for analysis and water analysis, and for water-
based cultures with acid-soluble metallic salts such as Ca
2+
Mg
, etc., for light to medium levels of soiling and medium to
high rinse requirements.
For organic residues, e.g., heavy soiling or after sterilization;
partially suitable for fats and waxes.
Not suitable for acid-soluble residues such as metallic salts and
amines.
For medium to heavy soiling and medium rinse requirements.
Connection to hot water and fully demineralized water
recommended.
For heat-sensitive wash items such as plastic flasks
(temperature resistance: at least 55°C (130°F)).
For standard applications and analyses, light to medium levels of
soiling, and medium rinse requirements.
For pipettes
For heavy oil soiling (crude oil, synthetic oils/lubricants, fuels,
and partially natural oils). This program can also be used for
removing fats and waxes.
Connection to hot water and fully demineralized water
recommended.
For cleaning and thermal disinfection at 93°C (199°F) with 10
minutes' temperature holding time.
Cold water rinse, holding time: 1 minute. For flushing out saline
solution, rinsing heavily soiled wash items, e.g., for preliminary
removal of soiling, residual disinfecting agent, or to prevent
residues from drying on and forming incrustations before running
a full load.
PROGRAMS
2+
and
Page 33
Hide quick links:
Advertisement
Table of Contents
