Table of Contents
Advertisement
PRODUCT INFORMATION
The amount of residual solvents on items going into the wash cabinet should be minimal.
There should be no more than a trace of any solvents with a flash point of below 21°C (70°F).
Chloride solutions, in particular hydrochloric acid, or ferrous materials that can rust or corrode
must not be placed in the cabinet.
Ensure that solutions or steam containing chlorides or hydrochloric acid do not come into
contact with the stainless steel outer casing of the machine in order to avoid any damage through
corrosion.
After any plumbing work, the water pipework to the machine will need to be vented. If this is
not done, machine components can be damaged.
The gaps between a built-in machine and adjacent cabinetry must not be sealed, e.g., with
silicone sealant, as this could compromise ventilation of the circulation pump.
Follow the installation instructions in the operating and installation instructions.
Safety with children
Children should be supervised in the vicinity of the machine. Do not allow children to play with
the machine. There is a danger that children might shut themselves in the machine.
Children must not use the machine.
Keep children away from process chemicals. These contain irritant and corrosive ingredients
which can cause burning in the eyes, mouth, and throat, or inhibit breathing. It is therefore
important to keep children away from the machine when the door is open. There could still be
residual process chemicals in the machine. Observe the safety data sheets for the process
chemicals and seek medical advice immediately if a child has swallowed process chemicals or
got them in their eyes.
REV.0.01_COD.650184_A4
Page 12
Hide quick links:
Advertisement
Table of Contents
