Table of Contents
Advertisement
Main door call Door call from the door with the main serial number
Sub door call
On-Screen-
Display (OSD)
supply voltage:
housing:
dimensions (in mm):
weight:
acceptable ambient temperature: 0 °C to 40 °C
input current:
max. input current:
video module
screen diagonal
resolution:
video signal input:
floor video input:
Video 6-wire installation necessary!
(according to the serial number sticker on the device
and the packaging). Two main door calls from front-
door stations with AS = 0 and AS > 0 can be distin-
guished.
Call from a front-door station. Different ring tones can
be generated at an indoor station by using different
buttons.
Thus, the ring tone is distinguished by the used serial
number. The indoor station occupies an area of five
serial numbers: Serial number SN (according to serial
number sticker), SN+1, SN+2, SN+3, SN+4. Each of
these serial numbers generate a different ring tone.
Programming the bell buttons of the front-door station
can be realised with the Service Device TCSK-01 and
TM
configo
.
The menu, which is shown on the screen and activat-
ed with the menu button of the device.
Technical data
Terms
+24 V ± 8 % (power supply and
control unit)
aluminium, anodised
(colors as listed in catalogue)
H 186 mm x W 101 mm x D 24 mm
360 g
I(a) = 0.4 mA, I(P) = 16.5 mA standby
I(Pmax) = 175 mA
TFT color module
3.5 inch
320 x 240 pixel, RGB
symmetric 1 Vss FBAS,
asymmetric 1 Vss FBAS,
5
Advertisement
Table of Contents
