I. Accessory parts
No.
Name
1. Working table
2. Screw
(4 × 16 mm)
3. Cord clamp
Note:
Keep the cord clamp properly for use when mount-
ing the authentication unit.
After unpacking, be sure to get rid of the
packaging materials and keep them out of
the reach of children.
Putting the head in the plastic bag
involves danger of suffocation.
WT-502
INSTALLATION MANUAL
Shape
Q'ty
1
A07EIXC001DA
3
9J08IXC075DA
1
4048IXC003DA
Working Table
II. Installing the working table
1. Using nippers, pull out the knockouts (at two
places) from the right side surface of the
machine.
2. Insert tabs (at two places) on the working table
into the holes in the machine and slide the work-
ing table in the direction of the arrow.
3. Secure the working table (three screws furnished
with the working table).
E-18
A07EIXC002DA
A07EIXC003DA
A07EIXC004DB