Table Of Contents; Product Specifications - Craftsman 842.240563 Owner's Manual

42 inch front mounted attachment
Table of Contents

Advertisement

TABLE OF CONTENTS
WARRANTY
2
MAINTENANCE
20
SAFETY RULES
3
SERVICE NOTES
21
~
ACCESSORIES
4
SERVICE AND ADJUSTMENTS
22-29
CONTENTS OF CARTON
5
TROUBLESHOOTING
30
ASSEMBLy
6-16
STORAGE
31
OPERATION
17-19
REPAIR PARTS
32-37
LIMITED ONE YEAR WARRANTY ON SNOW THROWER ATTACHMENT
For one (1) year from the date of purchase, if this Snow Thrower Attachment is maintained, lubricated and tuned up
according to the instructions in the owner's manual, Sears will repair or replace, free of charge, any parts found to
be defective in material or workmanship.
This Warranty does not cover:
• Expendable items which become worn during normal use, such as belts.
• Repairs necessary because of operator abuse, negligence, improper storage or accident or the failure to maintain
the equipment according to the instructions contained in the Owner's Manual.
• Snow Thrower Attachment used for commercial or rental purposes.
WARRANlY SERVICE IS AVAILABLE BY RETURNING THE SNOW THROWER TO THE NEAREST SEARS SERVICE
CENTER/DEPARTMENT IN THE UNITED STATES.
This Warranty gives you specific legal rights, and you may also have other rights which may vary from state to state.
SEARS, ROEBUCK AND CO.,
0/817
WA. HOFFMAN ESTATES,IWNOIS
60179
Please read and keep this manual. The instructions will
When right and lett are mentioned in this manual, it
enable you to assemble and maintain your Snow
means when you are in the operating position (seated
Thrower properly. Always observe the "Safety Rules."
behind the steering wheel).
Record serial number and date of purchase in space
PRODUCT SPECIFICATIONS
provided below.
MODEL
NUMBER: _---=8;..:.4=2.=2...:..;40::.:5=6.:::..3
_
SERIAL
NUMBER:
_
DATE OF
PURCHASE:
_
The model and serial numbers will be found on a plate
attached to the left side of the auger housing.
WIDTH OF SNOW PICKUP
42 IN.
AUGER HOUSING HEIGHT
20.5 IN.
SNOW AUGER DIAMETER
15.5 IN.
DISCHARGE OPENING
6.0 IN.
DISCHARGE CHUTE ROTATION
240
0
SKID SHOE ADJUSTMENT
o
to 1.5 IN.
POWER BY TRACTOR ENGINE
SCRAPER BLADE REPLACEABLE
/ \
You should record both serial number and date of
purchase and keep in a safe place for future
reference.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents