214
4-2. Driving procedures
Engine (ignition) switch
Performing the following operations when carrying the electronic key on your
person starts the engine or changes engine switch modes.
Starting the engine
Pull the parking brake switch to check that the parking brake is set. (P. 228)
1
Parking brake indicator will come on.
Check that the shift lever is set in P.
2
Firmly depress the brake pedal.
3
If it is not displayed, the engine cannot be started.
Press the engine switch shortly and
4
firmly.
When operating the engine switch, one
short, firm press is enough.
It is not necessary to press and hold the
switch.
The engine will crank until it starts or for
up to 30 seconds, whichever is less.
Continue depressing the brake pedal
until the engine is completely started.
Diesel engine only: the
turns on. The engine will start after the
indicator light goes out.
The engine can be started from any
engine switch mode.
LX570_450d_OM_OM60R63E_(GE)
and a message will be displayed on the multi-information display.
indicator