Lexus LX 570 Owner's Manual page 271

270
4-5. Using the driving support systems
Changing settings of the pre-crash safety system
Disabling the pre-crash safety system
■
Press the PCS switch for 3 seconds
or more.
The PCS warning light will turn on
and a message will be displayed on
the multi-information display.
To enable the system, press the PCS
switch again.
The system is enabled each time the
engine switch is turned to IGNI-
TION ON mode.
Changing the pre-crash warning timing
■
Press the PCS switch to display the
current warning timing on the multi-
information display. Each time the
PCS switch is pressed with the
warning timing displayed, the warn-
ing timing will change as follows.
The operation timing setting is
retained when the engine switch is
turned off.
Far
1
The warning will begin to operate
earlier than with the default timing.
Middle
2
This is the default setting.
Near
3
The warning will begin to operate later than with the default timing.
LX570_450d_OM_OM60R63E_(GE)