Lexus LX 570 Owner's Manual page 492

Hide thumbs Also See for LX 570:

Table of Contents

Device with rolling code: If the indicator light flashes rapidly, your

garage door opener motor (or other device) is equipped with a rolling

code. Complete the programming process by firmly pressing and hold-

ing the programmed HomeLink

If the garage door or other device does not operate, proceed to "Pro-

gramming a rolling code system".

Repeat the steps above to program another device for any of the remaining

Programming a rolling code system

Locate the "Learn" or "Smart"

button on the garage door

opener motor in the garage.

This button can usually be found

where the hanging antenna wire is

attached to the unit. The name and

color of the button may vary by man-

ufacturer. Refer to the owner's man-

ual supplied with the garage door

opener motor for details.

Press and release the "Learn" or

"Smart" button.

after performing

Press and hold the desired

vehicle) for 2 seconds and

release it. Repeat this sequence

(press/hold/release) up to 3

times to complete programming.

If the garage door opener motor

operates when the HomeLink

ton is pressed, the garage door

LX570_450d_OM_OM60R63E_(GE)

5-6. Using the other interior features

within 30 seconds

button (inside the

button for 2 seconds and then release