Lexus LX 570 Owner's Manual page 491

490
5-6. Using the other interior features
Programming HomeLink
■
Press and release the HomeLink
1
that the HomeLink
Perform
programming will not be able to be completed.
Point the remote control transmit-
2
ter for the device at the rear view
mirror, 25 to 75 mm (1 to 3 in.)
from the HomeLink
Keep the HomeLink
in view while programming.
Garage door type A

Press and hold the remote control
3
transmitter
HomeLink
changes from slowly flashing
orange to rapidly flashing green
(rolling code) or continuously lit
green (fixed code), then release
the button.
Programming an entry gate/Programming the HomeLink

type B)
Press and release the remote control transmitter button at 2 second inter-
3
vals, repeatedly, until the HomeLink
flashing (orange) to rapidly flashing (green) (rolling code) or continuously
lit (green) (fixed code).
Test the HomeLink
4
and observing the indicator light:
Device with fixed code: If the indicator light is solid/continuous, pro-
●
gramming has been completed and your garage door or other device
should operate when the HomeLink
LX570_450d_OM_OM60R63E_(GE)
®
®
indicator light flashes (orange).
within 60 seconds of
3
®
buttons.
®
indicator light
button until the
®
indicator light
®
operation by pressing the newly programmed button
®
button you want to program and check
, or the indicator light will stop flashing and
1
®
indicator light changes from slowly
®
button is pressed and released.
®
(garage door