628
8-1. Specifications
Diesel engine (for EURO IV models
Oil capacity
(Drain and refill — reference
With filter
Without filter
1
*
: EURO IV is an emission standard. If it is not clear that your vehicle meets relevant
standards, contact your Lexus dealer.
*
2
: The engine oil capacity is a reference quantity to be used when changing the engine
oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level
on the dipstick.
Engine oil selection
■
"Toyota Genuine Motor Oil" is used in your Lexus vehicle. Use Lexus
approved "Toyota Genuine Motor Oil" or equivalent to satisfy the following
grade and viscosity.
Oil grade: API CF-4, CF or ACEA B3, B4, B5 or JASO DL-0
Recommended viscosity (SAE):
SAE 5W-30 is the best choice for
good fuel economy and good start-
ing in cold weather.
If you use SAE 10W-30 or a higher
viscosity engine oil in extremely low
temperatures, the engine may
become difficult to start, so SAE
5W-30 engine oil is recommended.
How to read oil container label:
The Japanese Automobile Standard
Organization (JASO) DL-0 Mark is
added to some oil containers to help
you select the oil you should use.
LX570_450d_OM_OM60R63E_(GE)
1
*
)
2
*
)
9.2 L (9.7 qt., 8.1 Imp. qt.)
8.2 L (8.7 qt., 7.2 Imp.qt.)
Temperature range anticipated
before next oil change
Preferred