72
1-1. For safe use
Installing child restraints using a seat belt
Rear-facing Baby seat (infant seat)/child seat (convertible seat)
■
Fold the seatback while pulling
1
the seatback angle lever. Return
the seatback and secure it at the
first lock position. (P. 161)
Place the child restraint system
2
on the second seat or the third
outboard seat facing the rear of
the vehicle.
Run the seat belt through the
3
child restraint system and insert
the plate into the buckle. Make
sure that the belt is not twisted.
Keep the lap portion of the belt
tight.
Install a locking clip near the tab
4
of the lap and shoulder belt by
inserting the lap and shoulder
webbing through the recesses of
the locking clip. Buckle the belt
again. If the belt has any slack,
release the buckle and reinstall
the locking clip.
LX570_450d_OM_OM60R63E_(GE)