Status Bar; Function Keys - Delta Electronics HMC Series Manual

HMC Take-out Robot for Injection Molding Machine

2.1.2 Status Bar

(1) Screen title: It displays the screen title that you currently use.
(2) Current program name: It displays current program number and program name.
1000 programs are provided to store different commands and for users to apply.
Click this button to enter the screen of [Program manager].
(3) User level: It displays four different user levels, operator, operator leader, engineer
and administrator. Click this button to log out. Click on it again to use different user
name to log in.
(4) Date & Time: It displays the current date and time.

2.1.3 Function Keys

June, 2015
Operate Screen
It includes the function of auto operation, single cycle and step run.
Manual Screen
Window of jog in manual mode will pop up. Users also can control the
cylinder in this window.
Teach Screen
Edit the program that you currently choose.
I/O Screen
Monitor and control the signal of cylinder, arm-in-position signal,
handshake signal with injection molding machine and the signal from
servo drive.
System Screen
Users can set up motion, moving distance/safety zone, protection and
servo related functions in this screen.
Alarm
It shows the information of current alarms and alarm history so that
users can identify the alarm causes.
Main Screen
Return to the main screen.
29