Applying New Program - Delta Electronics HMC Series Manual

7.1 Applying New Program

Here introduces the procedure of starting up the system, creating new program and
auto-operating the system.
Step 1: When the system is started up, please execute homing first to identify a correct
coordinate system.
Step 2: Log in and enter the screen of [Program Manager].
Step 3: Select program No.4 and open to edit it.
Step 4: Enter [DEMO] as [Program Name] and load in this program for teaching and
editing.
102
HMC Take-out Robot for Injection Molding Machine
June, 2015