Homing - Delta Electronics HMC Series Manual

HMC Take-out Robot for Injection Molding Machine

2.5.1 Homing

Click [Homing of Main system] on main screen. A window of motion sequence and
posture will pop-up. Click on [Homing] again, the system will start homing.

When executing the command, the button will be glittering and a text of [Homing...] in
red color will appear on top-left corner. After the motion is complete, the button will
become blue and shows command completed.
This sequence and posture can be set in [System] > [Safety setting] > [Homing /
Standby point].
37
June, 2015