Toyota AVENSIS Manual page 73

*
: If the head restraint interferes with your child restraint system, and the
head restraint can be removed, remove the head restraint.
Otherwise, put the head restraint in the upper most position.
When securing some types of child restraint systems in rear seat, it
may not be possible to properly use the seat belts in positions next to
the child restraint without interfering with it or affecting seat belt effec-
tiveness. Be sure your seat belt fits snugly across your shoulder and
low on your hips. If it does not, or if it interferes with the child restraint,
move to a different position. Failure to do so may result in death or
serious injury.
The child restraint systems mentioned in the table may not be avail-
able outside the EU area.
● When installing a child restraint in the rear seats, adjust the front
seat so that it does not interfere with the child or child restraint sys-
tem.
● When using a "TOYOTA G 0+,
BABY SAFE PLUS with ISOFIX
FIXATION, BASE PLATFORM",
lock the support leg where 4th
hole is partially visible.
● When using a "TOYOTA MINI" or "TOYOTA MIDI", adjust the sup-
port leg and ISOFIX connectors as follows:
Lock the ISOFIX connectors
1
where number 4 can be
seen.
Lock the support leg where 4
2
holes can be seen.
1-2. Child safety
73
1