License plate light
■
Remove the cover.
1
Insert a flathead screwdriver or
similar into the hole and remove
it as shown in the illustration.
To prevent damaging the vehi-
cle, wrap the flathead screw-
driver with a tape.
Remove the light bulb.
2
When installing, reverse the steps listed.
3
Side turn signal lights
■
Remove the cover.
1
Insert the flathead screwdriver
and slide along the side turn sig-
nal light.
To prevent damaging the vehi-
cle, wrap the flathead screw-
driver with a tape.
Press on the 2 clips and
2
remove the side turn signal
light from the visor housing.
7-3. Do-it-yourself maintenance
509
7