Toyota AVENSIS Manual page 324

324
5-3. Using the radio
Scanning radio stations (type C only)
Scanning the preset radio stations
■
Press and hold the "SCAN" button until you hear a beep.
1
When the desired station is reached, press the button once
2
again.
Scanning all radio stations within range
■
Press the "SCAN" button.
1
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press the button once
2
again.
Using the station list
Updating the station list
■
Press the "LIST" button (type A and B) or the tune/scroll knob
1
(type C).
The station list will be displayed.
Press
2
"Updating" is displayed while the searching is in process, and then avail-
able stations will be listed on the display.
To cancel the updating process, press the back button (type A and B) or
[BACK] (type C).
Selecting a station from the station list
■
Press the "LIST" button (type A and B) or the tune/scroll knob
1
(type C).
The station list will be displayed.
Turn the tune/scroll knob to select a station.
2
Press the knob to tune in the station.
3
To return to the previous display, press the back button (type A and B)
or
[UPDATE] to update the list.
[BACK] (type C).