Toyota AVENSIS Manual page 333

■
Display
Up to 24 characters can be displayed.
Depending on the contents recorded, the characters may not be displayed
properly or may not be displayed at all.
■
Error messages
If an error message is displayed, refer to the following table and take the
appropriate measures. If the problem is not rectified, take the vehicle to any
authorized Toyota dealer or repairer, or another duly qualified and equipped
professional.
Message
"CD CHECK"
"ERROR"
"WAIT"
"NO SUPPORT"
■
Discs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc fea-
tures, or due to scratches, dirt or deterioration.
CDs with copy-protect features may not play correctly.
■
CD player protection feature
To protect the internal components, playback is automatically stopped when a
problem is detected while the CD player is being used.
5-4. Playing an audio CD and MP3/WMA discs
Cause
• The disc is dirty or
damaged.
• The disc is inserted
upside down.
There is a malfunction
within the system.
Operation has stopped
due to a high tempera-
ture inside the player.
MP3/WMA files are not
included in the CD.
Correction procedures
• Clean the disc.
• Insert the disc cor-
rectly.
Eject the disc.
Wait for a while and
then press the "MODE"
button.
Contact any autho-
rized Toyota dealer or
repairer, or another
duly qualified
equipped professional
if the CD still cannot be
played.
Eject the disc.
333
5
and