Toyota AVENSIS Manual page 468

468
7-3. Do-it-yourself maintenance
Vehicles with color display
Press
4
(→P. 112)
Press
5
menu and then press
Select "
6
Press
7
on "Set Tyre Pressure".
Press
8
on "SET" to initialize the sys-
tem.
If initialization is completed,
the tire pressure warning
light will blink 3 times.
◆
Registering ID codes
The tire pressure warning valve and transmitter is equipped with a
unique ID code. When replacing a tire pressure warning valve and
transmitter, it is necessary to register the ID code. Have the ID code
registered by any authorized Toyota dealer or repairer, or another
duly qualified and equipped professional.
or of the meter control switch to select
or of the meter control switch to select the settings
to display the menu.
Setup" and then press
while the cursor is
while the cursor is
.
to display the menu.