Toyota AVENSIS Manual page 467

How to initialize the tire pressure warning system
■
Park the vehicle in a safe place and turn the engine switch to the
1
"LOCK" position (vehicles without smart entry & start system) or
off (vehicles with smart entry & start system).
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
2
pressure level. (→P. 619)
Make sure to adjust the tire pressure to the specified cold tire inflation
pressure level. The tire pressure warning system will operate based on
this pressure level.
Turn the engine switch to the "ON" position (vehicles without
3
smart entry & start system) or IGNITION ON mode (vehicles with
smart entry & start system).
Vehicles with monochrome display
Press the "DISP" switch until the settings screen appears.
4
(→P. 108)
Press and hold the "DISP" switch to enter the adjustment mode.
Press the "DISP" switch until the menu of tire pressure warning
5
system appears.
Press and hold the "DISP" switch to display the menu.
Press and hold the "DISP"
6
switch while the cursor is on
"SET TYRE PRESSURE".
Press and hold the "DISP"
7
switch while the cursor is on
"SET" to initialize the system.
If initialization is completed,
the tire pressure warning
light will blink 3 times.
7-3. Do-it-yourself maintenance
467
7