210
4-2. Driving procedures
Changing the engine switch positions
"LOCK"
1
The steering wheel is locked and
the key can be removed. (Vehicles
with Multidrive: The key can be
removed only when the shift lever
is in P.)
"ACC"
2
Some electrical components such
as the audio system can be used.
"ON"
3
All electrical components can be used.
"START"
4
For starting the engine.
■
Turning the key from "ACC" to "LOCK"
Shift the shift lever to P (Multidrive) or N (manual transmission).
1
(→P. 219, 225)
Push in the key and turn it to the
2
"LOCK" position.
■
If the engine does not start
The engine immobilizer system may not have been deactivated. (→P. 78)
Contact any authorized Toyota dealer or repairer, or another duly qualified
and equipped professional.
■
When the steering lock cannot be released
When starting the engine, the engine
switch may seem stuck in the "LOCK"
position. To free it, turn the key while turn-
ing the steering wheel slightly left and
right.