Connecting Ac Power - Avaya Ethernet Routing Switch 3600 Series Manual

Installation preparation
Note:
AC power cords are not packaged with the switch. Ensure you order the correct power cord for
your region.

Connecting AC power

Before you begin
• To connect AC power to the switch an appropriate AC power cord is required. Ensure the
switch power supply supports AC power input.
Danger:
Use only power cords with a grounding path. Without a proper ground, a person who
touches the switch is in danger of receiving an electrical shock. A switch without a proper
grounding path can result in excessive emissions.
Procedure
1. Plug the female end of the AC power cord into the back of the switch power supply.
Important:
The switch powers on immediately when it is connected to a suitable AC power source.
The switch does not have a power switch.
2. Plug the male end of the AC power cord into a suitable AC power outlet.
Caution:
Ensure you only use an appropriately rated AC power cord. Do not use an extension
cord.
Warning:
The only way to turn off the switch is to disconnect the power. Always connect the AC
power cord in a location that can be reached quickly and safely in case of an
emergency.
January 2017 Installing Avaya Ethernet Routing Switch 3600 Series
Comments on this document? infodev@avaya.com
18