Unpacking; Assembly - Superior Fireplaces VCM3026ZMN Installation And Operation Instructions Manual

Unvented vent-free gas compact classic hearth fireplaces
Table of Contents

Advertisement

1. Remove fi replace and hood from carton. Log
is wrapped and inside fi replace. Do not remove
at this time.
2. Remove all protective packaging applied to
fi replace for shipment.
WARNING: Always have branch
support and screen in place before oper-
ating fi replace. This prevents excessive
temperatures on fi replace surfaces.
WARNING: Failure to position
the parts in accordance with these
diagrams or failure to use only parts
specifi cally approved with this fi re-
place may result in property damage
or personal injury.
ASSEMBLING FIREPLACE
Tools Required:
• Phillips screwdriver
• 5/16" hex wrench
• slotted screwdriver
• scissors
1. Remove two screws that hold fi replace screen
in place for shipping. These screws are located
near top of screen. Discard screws. Lift fi replace
screen up and pull out to remove. Set screen
aside until installation has been completed.
2. Cut two plastic straps to remove the log from
the fi rebox cavity.
3. An optional blower is available. See Accessories,
Page 34. Install optional blower now. Follow
installation instructions provided with blower
or (see Page 15).
6

UNPACKING

3. Make sure your fi replace includes one hardware
packet.
4. Check all items for any shipping damage. If
damaged, promptly inform dealer where you
purchased the fi replace.

ASSEMBLY

4. Locate four black phillips sheet metal screws
from the hardware packet.
Burner Support
With Log Locator
Tabs
Screen
5. Rotate hood as shown in Figure 3. Make sure
hood tabs point toward fi replace.
6. Insert hood tabs between baffl e and louvers
(see Figure 3, Page 7).
7. Gently rotate hood to upright position. Make
sure hood tabs are behind louvers and hood
is resting on fi rebox top (see Figure 3).
8. Align screw holes on hood with screw holes
on fi rebox top.
9. Insert screws as shown in Figure 3. Tighten
screws fi rmly.
Hood Tabs
Hood
Sheet Metal
Screws
Figure 3 - Assembling Hood
SuperiorFireplaces.us.com
Shoulder
Screw
Branch
Support
Figure 2 - Removing Screen
Louver
Hood Tab
Baffl e
Firebox Top
126872-01C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vcm3026zmp

Table of Contents