Table of Contents
Advertisement
VCM3026ZMP
• Rating: 14,000/26,000 Btu/Hr
• Gas Type: Propane/LP Gas Only
• Ignition: Piezo
• Manifold Pressure: 8" W.C.
• Inlet Gas Pressure (in. of water):
Maximum: 14" W.C., Minimum*: 11" W.C.
• Dimensions (H x W x D): Fireplace (including hood
and screws) - 25-7/8" x 26-13/16" x 9-3/8"
Carton - 32-5/8" x 27-13/16" x 11-5/8"
• Weight: Fireplace - 44.5 lbs.
Shipping - 48 lbs.
* For purpose of input adjustment
See Pages 35-36 for a complete replacement parts
list. Use only parts supplied from the manufacturer.
Normally, all parts should be ordered through your
IHP distributor or dealer. Parts will be shipped at
prevailing prices at time of order.
NEVER USE SUBSTITUTE MATERIALS. USE OF
NON-APPROVED PARTS CAN RESULT IN POOR
PERFORMANCE AND SAFETY HAZARDS.
SERVICE HINTS
When Gas Pressure Is Too Low
• pilot will not stay lit
• burners will have delayed ignition
• appliance will not produce specifi ed heat
• propane/LP gas supply may be low
You may feel your gas pressure is too low. If so,
contact your local propane/LP or natural gas supplier.
Purchase these appliance accessories from your
local dealer. If they can not supply these acces-
sories, contact IHP at SuperiorFireplaces.us.com
for referral information. You can also write to the
address listed on the back Page of this manual.
Only kits supplied by IHP shall be used in the in-
stallation of this appliance. Use of non-approved
accessory/part kit(s) can result in poor perfor-
mance and safety hazards.
NOTICE: All accessories may not be
available for all fi replace models.
126872-01C
SPECIFICATIONS
VCM3026ZMN
• Rating: 14,000/26,000 Btu/Hr
• Gas Type: Natural Gas Only
• Ignition: Piezo
• Manifold Pressure: 3.5" W.C.
• Inlet Gas Pressure (in. of water):
Maximum: 10.5" W.C., Minimum*: 5" W.C.
• Dimensions (H x W x D): Fireplace (including hood
and screws) - 25-7/8" x 26-13/16" x 9-3/8"
Carton - 32-5/8" x 27-13/16" x 11-5/8"
• Weight: Fireplace - 44.5 lbs.
* For purpose of input adjustment
REPLACEMENT PARTS
When ordering repair parts, always give the follow-
ing information:
1. The model number of the appliance.
2. The serial number of the appliance.
3. The part number.
4. The description of the part.
5. The quantity required.
6. The installation date of the appliance.
If you encounter any problems or have any ques-
tions concerning the installation or application of
this appliance, please contact your dealer.
You may have further questions about instal-
lation, operation, or troubleshooting. Please
contact your IHP dealer for any questions or
concerns. When contacting your dealer please
have your model and serial numbers of your
appliance ready. You can also visit our web site
at SuperiorFireplaces.us.com.
ACCESSORIES
Black
PERIMETER TRIM KIT
Cat. No. F1816, Model GAB6094 - Black
Cat. No. F1817, Model GAP6094 - Platinum
For all models. Optional three-sided perimeter trim
kit for recessed installations (when unit is on the
fl oor) or in mantel. Provides a fi nished appearance
by covering rough edges of wall/mantel opening.
SuperiorFireplaces.us.com
Shipping - 48 lbs.
TECHNICAL SERVICE
Platinum
33
Advertisement
Table of Contents
