Table of Contents
Advertisement
DIMM Installation
1. Insert the desired number of DIMMs
into the memory slots based on the
recommended DIMM population table on
page
31.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.
DIMM Removal
Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
JUIDB1
UID-LED
JBT1
PCH
LED6301
BMC
JTPM1
M.2-PCH
JCOM1
FAN3
JPWR2
JPWR3
LED1
Release Tabs
Insert the DIMM module into the memory slot.
33
Chapter 2: Installation
VGA
BT1
LAN
CTRL
LAN
CTRL
JNVME3
LAN1/2
LAN3
USB 0/1 (3.0)
CLOSE 1st
CPU
OPEN 1st
JFP1
FAN1
JPWR1
FAN2
I-SGPIO1
Notches
Advertisement
Table of Contents
