Motherboard Features - Supermicro X11SRi-IF User Manual

Table of Contents

Advertisement

Motherboard Features

CPU
Supports an Intel Xeon W-2100 series (Socket R4) processor with up to 18 cores and a thermal design power (TDP) of
up to 140W
Memory
Up to 128GB of RDIMM and 256GB of LRDIMM DDR4 (288-pin) ECC memory with speeds of up to 2666 MHz in four
memory slots
Note: Memory speed support depends on the processors used in the system.
DIMM Size
Up to 64GB at 1.2V
Note: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
Intel PCH C422
Expansion Slots
One (1) OCuLink PCI-Express 3.0 x4 Connector (Dual-function for SATA 3.0 or NVMe)
One (1) OCuLink PCI-Express 3.0 x4 Connector (for NVMe)
One (1) PCI-Express 3.0 x16 Slot (CPU SLOT6)
Network
Intel Ethernet Controller i210 for Dual 1G BASE-T Ports
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
ASPEED AST2500 BMC
Graphics
Graphics controller via ASPEED AST2500 BMC
I/O Devices
Serial (COM) Port
Video (VGA) Port
Peripheral Devices
Two (2) USB 3.0 ports on the rear I/O panel (USB0/USB1)
Note: The table above is continued on the next page.
Motherboard Features
One (1) front accessible serial port header (JCOM1)
One (1) VGA connection on the rear I/O panel
13
Chapter 1: Introduction

Advertisement

Table of Contents
loading

Table of Contents