Supermicro X11SRi-IF User Manual page 40

Super X11SRi-IF User's Manual
HDD_LED
The HDD LED connection is located on pins 5 and 6 of JFP1. Attach a cable to pin 6 to show
hard drive activity status. Refer to the table below for pin definitions.
UID/Power LED
Connect a cable to pin 7 of JFP1 to use the UID switch. The Power LED connection is located
on pin 8 of JFP1. Refer to the table below for pin definitions.
PWR
Power Button
Reset
Reset Button
1
HDD LED
Pin Definitions (JFP1)
Pin# Definition
5 3.3V Stdby
6 HDD Active
Power LED
Pin Definitions (JFP1)
Pin# Definition
7 UID SW
8 PWR LED
1 2
Ground
BMC_UID_LED
HDD LED
3.3V
PWR LED
UID
7 8
1. UID Switch
2. PWR LED
2
40