Table of Contents
Advertisement
4.5 IPMI
Use this feature to configure Intelligent Platform Management Interface (IPMI) settings.
IPMI Firmware Revision
This feature indicates the IPMI firmware revision used in your system.
IPMI Status (Baseboard Management Controller)
This feature indicates the status of the IPMI firmware installed in your system.
System Event Log
Note: After making changes on a setting, be sure to reboot the system for the chang-
es to take effect.
Enabling/Disabling Options
SEL Components
Select Enabled for all system event logging at bootup. The options are Disabled and Enabled.
Erasing Settings
Erase SEL
Select Yes, On next reset to erase all system event logs upon next system reboot. Select
Yes, On every reset to erase all system event logs upon each system reboot. Select No to
keep all system event logs after each system reboot. The options are No, Yes, On next reset,
and Yes, On every reset.
89
Chapter 4: UEFI BIOS
Advertisement
Table of Contents
