Battery Removal And Installation; Battery Removal; Proper Battery Disposal; Battery Installation - Supermicro X11SRi-IF User Manual

Super X11SRi-IF User's Manual

3.4 Battery Removal and Installation

Battery Removal

To remove the onboard battery, follow the steps below:
1. Power off your system and unplug your power cable(s).
2. Remove the battery cable from the BT1 header on the motherboard.
3. Remove the battery.

Proper Battery Disposal

Warning: Please handle used batteries carefully. Do not damage the battery in any way; a
damaged battery may release hazardous materials into the environment. Do not discard a used
battery in the garbage or a public landfill. Please comply with the regulations set up by your
local hazardous waste management agency to dispose of your used battery properly.

Battery Installation

1. Power off your system and unplug your power cable(s).
2. Connect the battery cable into the battery header (BT1) and push it down until you hear
a click to ensure that the cable is securely locked.
3. Use the foam tape on the back side of the battery to secure the battery to a flat surface
on the top of LAN1 port. DO NOT place the battery on the heatsink.
58