Network Stack Configuration - Supermicro X11SRi-IF User Manual

Super X11SRi-IF User's Manual
Onboard Video
Use this feature to select the Onboard Video Option ROM type. The options are Do not
launch, EFI, and Legacy.
Onboard Storage
Use this feature to select the Onboard Storage ROM type. The options are Do not launch,
EFI, and Legacy.
CPU1 Onboard NVME OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
CPU1 Slot 1 PCI-E X16 OPROM
Use this feature to select which firmware type to be loaded for the add-on card in this slot.
The options are Disabled, Legacy, and EFI.
Onboard LAN 1 Option ROM
Use this feature to select which firmware type to be loaded for onboard LAN ports. The options
are Disabled, EFI, and Legacy.
Onboard LAN 2 Option ROM
Use this feature to select which firmware type to be loaded for onboard LAN ports. The options
are Disabled, EFI, and Legacy.
Network Stack Configuration
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unified Extensible
Firmware Interface) for network stack support. The options are Disabled and Enabled.
Ipv4 PXE Support
Select Enabled to enable IPv4 PXE boot support. The options are Disabled and Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled and Enabled.
Ipv6 PXE Support
Select Enabled to enable IPv6 PXE boot support. The options are Disabled and Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled and Enabled.
84