Bmc Network Configuration - Supermicro X11SRi-IF User Manual

Super X11SRi-IF User's Manual
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system event log
is full. Select Erase Immediately to erase all events in the log when the system event log is
full. The options are Do Nothing and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
Use this feature to select how EFI status codes are logged. The options are Disabled, Both,
Error code, and Progress code.

BMC Network Configuration


The following items will be displayed:
•
IPMI LAN Selection: This feature displays the IPMI LAN setting. The default setting is
Failover.
•
IPMI Network Link Status: This feature displays the IPMI Network Link status. The default
setting is Shared LAN.
•
Station MAC Address: This feature displays the Station MAC address for this computer.
Mac addresses are 6 two-digit hexadecimal numbers.
•
VLAN: This feature displays the status of VLAN support. The default setting is Disabled.
•
IPv4 Address Source: This feature displays the source of IPv4 addresses. The default
setting is DHCP.
•
Station IP Address: This feature displays the Station IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
Subnet Mask: This feature displays the sub-network that this computer belongs to. The
value of each three-digit number separated by dots should not exceed 255.
•
Gateway IP Address: This feature displays the Gateway IP address for this computer. This
should be in decimal and in dotted quad form (i.e., 192.168.10.253).
•
IPv6 Address Status: This feature displays the IPv6 address status. The default setting is
Disabled.
•
Station IPv6 Address: This feature displays the station IPv6 address.
•
Prefix Length: This item displays the prefix length.
•
IPv6 Router IP Address: This feature displays the IPv6 router IP address.
90