Table of Contents
Advertisement
OMRON
Fan
product
OMRON
product
Forced Air Circulation
Room Cooling
Cool the entire room where the control panel is located.
Low Temperatures
The IPC may not start normally if the temperature is below 0°C when the power is turned ON. Maintain
an air temperature of at least 5°C inside the panel, by implementing measures such as installing a
low-capacity space heater in the panel.
Alternatively, leave the IPC power ON to keep the IPC warm.
5-3-4
Humidity
Rapid temperature changes can cause condensation to occur, resulting in malfunctioning due to short-
circuiting.
When there is a possibility of this occurring, take measures against condensation, such as leaving the
IPC power ON at night or installing a heater in the control panel to keep it warmer.
Power ON
5-3-5
Vibration and Shock
The IPC is tested for conformity with the sine wave vibration test method (IEC 60068-2-6) and the
shock test method (IEC 60068-2-27) of the Environmental Testing for Electrotechnical Products. It is
IPC Application Controller User's Manual (I632)
Cooler
Control panel
Room Cooling
Control panel
Moisture
absorber
OMRON
product
Examples of Measures against Condensation
Heater
5 Installation
5
5-13
Advertisement
Table of Contents
