Table of Contents
Advertisement
3 Software
1
Ensure the revision number of the UPS is correct.
Refer to the Hardware Manual for details.
2
Ensure the UPS is connected to the IPC with a USB cable.
3
Open the Power Attendant Lite Utility installer folder and activate the installer file setup.exe.
4
Follow the installer steps to complete the installation.
The Power Attendant Lite Utility is installed.
Configuration
Configure the Power Attendant Lite Utility before using the IPC with a UPS connected using USB.
To configure the Power Attendant Lite Utility:
1
Activate the icon of the Power Attendant Lite Utility to start the software.
A UPS selection window will be displayed.
2
Select the connected UPS.
A Login window will be displayed.
3
Login with ID Admin and password omron.
The Top window with UPS status information will be displayed.
4
Configure the parameters for your specific situation.
3-22
IPC Application Controller User's Manual (I632)
Advertisement
Table of Contents
