Table of Contents
Advertisement
3 Software
Messages Using the Rescue Disk
Using the Rescue Disk the rescue disk utility can display the following error messages:
Error ID
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
3-16
*1
Backup creation of
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
*1
Restore action of
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
Cannot allocate the partition for storing backup data. There may be a problem with the target
USB device. Create the Rescue Disk utility on another USB device and try again
Cannot create a partition for storing backup data. There may be a problem with the target USB
device. Create the Rescue Disk utility on another USB device and try again
The partition for storing backup data cannot be identified. There may be a problem with the
target USB device. Create the Rescue Disk utility on another USB device and try again
The partition for storing backup data cannot be prepared for use. There may be a problem
with the target USB device. Create the Rescue Disk utility on another USB device and try
again
Unable to identify an Omron Industrial PC. Power cycle the system using the power connector,
then try again
Unable to identify an Omron Industrial PC. Power cycle the system using the power connector,
then try again
*1
Backup creation of
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
*1
Restore action of
partition failed. Please try again or contact an Omron service representa-
tive if the problem persists
Cannot mount the partition for storing backup data. There may be a problem with the target
USB device. Create the Rescue Disk utility on another USB device and try again
*1
Failed creating
partition verification files. Please try again or contact an Omron service repre-
sentative if the problem persists
*1
Failed to verify
partition backup files. Please try again or contact an Omron service represen-
tative if the problem persists
Cannot create a backup. An Omron NY-series Industrial PC has not been detected. Please
contact an Omron service representative
Cannot restore the backup. An Omron NY-series Industrial PC has not been detected. Please
contact an Omron service representative
Cannot find a destination device. Please ensure that there is an SSD or HDD inserted in the
IPC
Cannot find the Rescue Disk medium. Please ensure the Rescue Disk USB device is connect-
ed to the Industrial PC, then restart the system and try again
Cannot mount Windows partition. Please ensure that you have a functional Windows system
before creating a backup
Cannot restore. The backup of the Boot partition is corrupted
Cannot deploy OSB due to an invalid Boot partition. Please perform a restore operation of the
complete MBR and Boot partition and try again
OSB deployment was unsuccessful. Please restart the Rescue Disk utility and try again
Multiple Rescue Disk media detected. Ensure there is only a single Rescue Disk USB device
connected to the Industrial PC, then reboot the system and try again
Cannot create backup records data due to missing OSB data
Cannot create backup records due to missing NX data
Cannot create backup records due to a missing Boot partition
Message
IPC Application Controller User's Manual (I632)
Advertisement
Table of Contents
