Nortel Ethernet Routing Switch 8000 Series Installing And Maintaining page 54

54 Installing the 8010co chassis
7
8
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2007, Nortel Networks
.
Installing the mounting rails for a Hendry rack
If the holes in the rack's vertical supports require clip nuts, insert a
clip nut in each of the 12 locations.
Lift the 8010co chassis onto the installation shelf.
WARNING
It requires three people to lift the 8010co chassis. To
make the chassis lighter, remove the interface modules
and power supplies before lifting.
Nortel Ethernet Routing Switch 8600
NN46205-303 01.01 Standard
4.1 2 January 2007
Nortel Networks Confidential