Nortel Ethernet Routing Switch 8000 Series Installing And Maintaining page 12

12 Introduction
National safety statements of compliance
CE marking statement (Europe only)
EN 60 950 statement This is to certify that the Nortel Networks 8000
Series chassis and components installed within the chassis are in
compliance with the requirements of EN 60 950 in accordance with the Low
Voltage Directive. Additional national differences for all European Union
countries have been evaluated for compliance. Some components installed
within the 8000 Series chassis may use a nickel-metal hydride (NiMH)
and/or lithium-ion battery. The NiMH and lithium-ion batteries are long-life
batteries, and it is very possible that you will never need to replace them.
However, should you need to replace them, refer to the individual component
manual for directions on replacement and disposal of the battery.
NOM statement 8010, 8006, and 8003 chassis (Mexico only)
The following information is provided on the devices described in this
document in compliance with the safety requirements of the Norma Oficial
Méxicana (NOM):
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2007, Nortel Networks
.
Exporter: Nortel Networks, Inc.
4655 Great America Parkway
Santa Clara CA 95054 USA
Importer: Nortel Networks de México, S.A. de C.V.
Avenida Insurgentes Sur #1605
Piso 30, Oficina
Col. San Jose Insurgentes
Deleg-Benito Juarez
México D.F. 03900
52 5 480 2100
Tel:
Fax: 52 5 480 2199
Input: Model 8003AC:
100-240 VAC, 50-60 Hz, 9 A max. per power supply
Nortel Ethernet Routing Switch 8600
NN46205-303 01.01 Standard
4.1 2 January 2007
Nortel Networks Confidential