Nortel Ethernet Routing Switch 8000 Series Installing And Maintaining page 49

Two 8010co chassis with BIP in a two-post rack
Mounting the 8010co chassis in a 19-inch rack
To install the 8010co chassis in a 19-in. two-post rack:
Step
1
2
3
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2007, Nortel Networks
.
Action
Place the installation shelf at the bottom of the rack inside the rails.
Holding the installation shelf in position, align the shelf's mounting
rail with the two holes on each side of the vertical rack support.
Insert a Phillips screw through each installation shelf mounting hole
and into the corresponding hole in the rack .
Nortel Ethernet Routing Switch 8600
NN46205-303 01.01 Standard
4.1 2 January 2007
Installing the chassis 49
Nortel Networks Confidential