Nortel Ethernet Routing Switch 8000 Series Installing And Maintaining page 18

18 Ethernet Routing Switch 8000 Series hardware components
The 8010co chassis has three bays for either AC or DC power supplies. The
8010co chassis supports the following AC power supplies:
•
•
The 8010co chassis supports the following DC power supplies:
•
•
For complete information about the Ethernet Routing Switch power supplies
and instructions for installing them, see Installing an AC Power Supply in
an 8000 Series Chassis (NN46205-306) or Installing a DC Power Supply in
an 8000 Series Chassis (NN46205-307). The 8010co chassis has two fan
trays for cooling [see Installing a Fan Tray in an Ethernet Routing Switch
8000 Series Chassis (NN46205-302)]. The figure
components" (page 19)
components in the 8010co chassis.
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2007, Nortel Networks
.
8004AC
8005AC
8004DC
8005DC
CAUTION
The 8004 and 8005 power supplies have different power ratings.
Therefore, Nortel recommends that you do not operate the
Ethernet Routing Switch 8000 Series chassis with a mix of power
supply models (8004 and 8005).
If you upgrade the Ethernet Routing Switch 8000 Series and have
a redundant power configuration, you can hot-swap the 8004
power supply with the 8005 power supply while the Ethernet
Routing Switch 8000 Series remains in operation. Do not operate
the chassis with a mix of power supply models for an extended
period of time.
Upgrade the power supplies before you upgrade the modules.
Nortel Ethernet Routing Switch 8600
NN46205-303 01.01 Standard
4.1 2 January 2007
also shows the location of customer-replaceable
"8010co chassis and
Nortel Networks Confidential