Nortel Ethernet Routing Switch 8000 Series Installing And Maintaining page 34

34 Installing the 8010, 8006, and 8003 chassis
The table
maximum number of chassis you can install in a 7-ft rack.
Maximum number of chassis in 7-ft rack
Chassis
8010
8006
8003
To install the chassis in a 19-in. equipment rack:
Step
1
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2007, Nortel Networks
.
"Maximum number of chassis in 7-ft rack" (page 34)
Maximum number of chassis installed in 7-ft rack
3
5
7
Action
Hold each rack-mounting bracket against one side of the chassis.
Make sure that the attachment holes in the bracket match the holes
in the chassis.
Each bracket fits only one side of the chassis. The brackets are
labeled R (right) and L (left). If the mounting holes do not line up
between a bracket and the chassis, try that bracket on the other
side of the chassis.
See the figures "Positioning the rack-mounting brackets: 8010
chassis" (page 34), "Positioning the rack-mounting brackets: 8006
chassis" (page 35), and
8003 chassis" (page
Positioning the rack-mounting brackets: 8010 chassis
Nortel Ethernet Routing Switch 8600
NN46205-303 01.01 Standard
4.1 2 January 2007
"Positioning the rack-mounting brackets:
35).
lists the
Nortel Networks Confidential