Nortel Ethernet Routing Switch 8000 Series Installing And Maintaining page 36

36 Installing the 8010, 8006, and 8003 chassis
3
4
Installing and Maintaining the Ethernet Routing Switch 8000 Series Chassis
Copyright © 2007, Nortel Networks
.
Attaching the rack-mounting brackets to the chassis: 8006 chassis
Attaching the rack-mounting brackets to the chassis: 8003 chassis
Measure the appropriate number of rack units of free vertical space
inside the rack and mark the spot.
The table "Number of rack units to allocate for chassis" (page 36)
lists the number of rack units to allocate for each chassis.
Number of rack units to allocate for chassis
Chassis
8010
8006
8003
Holding the chassis in position, align the flanged end of each
mounting rail with the two holes on each side of the vertical rack
support.
It is easiest to complete this step with two people. Make sure
that the hole pairs on either side of the vertical support match
horizontally. See the figures
with the equipment rack: 8010 chassis" (page
Nortel Ethernet Routing Switch 8600
NN46205-303 01.01 Standard
4.1 2 January 2007
Rack units
13.2
9.7
6.0
"Aligning the rack-mounting brackets
Inches
23.1
16.9
10.5
37), "Aligning the
Nortel Networks Confidential