Toro Z Master Professional 7500-D Series Operator's Manual page 8

Hide thumbs Also See for Z Master Professional 7500-D Series:
Table of Contents

Advertisement

Side Discharge Mowers Only
1. Thrown object
hazard—keep bystanders
away.
2. Thrown objects hazard,
mower—do not operate
without the deflector,
discharge cover, or grass
collection system in place.
Note:
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the maximum
recommended slope indicated on the decal. Review the instructions for operating the machine on slopes in the Operator's Manual as
well as the conditions in which you would operate the machine to determine whether you can operate the machine in the conditions
on that day and at that site. Changes in the terrain can result in a change in slope operation for the machine. If possible, keep the
cutting units lowered to the ground while operating the machine on slopes. Raising the cutting units while operating on slopes can
cause the machine to become unstable.
1. Warning—read the Operator's Manual; do not operate this
machine unless you are trained; wear hearing protection.
2. Cutting/dismemberment hazard of the hand, mower blade;
entanglement hazard of the hand, belt—stay away from
moving parts; keep all guards and shields in place.
3. Ramp hazard—do not use dual ramps when loading onto a
trailer; use 1 ramp wide enough for the machine; use a ramp
with a slope less than 15°; back up the ramp when loading the
machine and drive forward off the ramp when unloading.
126-6464
3. Cutting/dismemberment
hazard of hand or foot,
mower blade—stay away
from moving parts; keep
all guards and shields in
place.
decal126-6464
126-8383
4. Runover/backover hazard—do not carry passengers; look
behind you when mowing in reverse.
5. Thrown object hazard—keep bystanders away.
6. Tipping hazard—do not use on slopes near open water; do
not use on slopes greater than 15°.
8
decal126-8383

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents