4.Replacement and Adjustment
Make sure that the stoppers of the clutches are set over the projections on the harness guide plate.
Drive Unit
1.
Remove the left cover (Printer models:
2.
Remove the main board
3.
For MF models, remove the main board bracket
4.
Remove the harness guide plate [A].
5.
Release the four hooks, and remove the timing belt cover [A].
6.
Remove the gear [B] and loosen the timing belt [C].
90
Left Cover
(Main Board (Printer
MF models:
Left
Models)).
(FCU (Only for Fax
Cover).
Models)).