Advertisement
Setting the Height/Depth of
the Groomer
The groomer blade height/depth can be set using the following chart, figures, and procedure:
Rear Roller
Height-of-Cut (mm)
Spacers Required
0
1
2
3
4
A
B
C
Figure 22
1. A = Low Height-of-Groom
range
2. B = High Height-of-Groom
range/Transport for A
range
Note:
If you are using the groomer on an eFlex
traction unit, note that the groomer will cause the unit
to drain the battery faster than without. The deeper
you set the groomer, the more power it will require
and the faster the battery charge will be depleted.
1. Make sure the rollers are clean. Position the
machine on a flat, level work surface.
Height-of-Cut
(inches)
1.5 mm
0.06 inches
3.0 mm
0.12 inches
4.8 mm
0.19 inches
6.3 mm
0.25 inches
7.8 mm
0.31 inches
9.6 mm
0.38 inches
11.1 mm
0.44 inches
12.7 mm
0.50 inches
15.8 mm
0.625 inches
19.0 mm
0.75 inches
G027983
3. C = Transport for B range
(reduces clearance to the
grass basket)
Groomer Arm
Position
A
A
B
B
B
B
B
B
B
B
2. Using the above chart, determine the amount of
rear roller spacers required to attain the desired
grooming height/depth.
Note:
If installing 3 or 4 spacers on each side of
the rear roller, use the longer screws (included
in loose parts) instead of the standard screws.
3. Set the height of cut of the main reel.
4. Using the above chart, determine the position
required to attain the desired grooming
height/depth. Raise or lower the grooming reel
as follows;
A. Loosen the bolts on the right and left
groomer arms
g027983
B. Rotate the arms up or down to the A or B
position
C. Tighten the bolts securing the adjustment.
9
Height-of-Grooming
Height-of-Grooming
Range (mm)
Range (inches)
0.7 to 1.5 mm
0.03 to 0.06 inches
1.5 to 3.0 mm
0.06 to 0.12 inches
2.2 to 4.8 mm
0.09 to 0.19 inches
3.0 to 6.3 mm
0.12 to 0.25 inches
3.8 to 7.8 mm
0.15 to 0.31 inches
4.5 to 9.6 mm
0.18 to 0.38 inches
5.3 to 11.1 mm
0.21 to 0.44 inches
6.3 to 12.7 mm
0.25 to 0.50 inches
9.3 to 12.7 mm
0.37 to 0.50 inches
12.7 to 15.7 mm
0.50 to 0.62 inches
(Figure
23).
Figure 23
(Figure
24).
g016234
Advertisement
